2016年7月5日星期二

E-cig coalition sues FDA to stop new regulations

E-cig coalition sues FDA to stop new regulations



The Food and Drug Administration is facing its largest lawsuit to date challenging its controversial tobacco deeming regulations that are scheduled to go into effect Aug. 8 for electronic cigarettes and vaporizers.



The Right to be Smoke-Free Coalition, representing 10 advocacy and trade associations, filed suit Monday in U.S. District Court for the District of Columbia.



Coalition members want a federal judge to permanently enjoin the FDA from implementing regulations that the FDA unveiled May 5. They want the regulations declared unlawful on constitutional and administrative grounds.
The typical e-cig is a battery-powered device that heats a liquid nicotine solution in a disposable cartridge and creates a vapor that is inhaled. A vaporizer can be supplied and reused through the insertion of a liquid capsule.
According to the coalition, about 20 million Americans have used an e-cig and/or vaporizer at least once.
As part of the federal Tobacco Control Act, FDA officials want new and enhanced products to be “substantially equivalent” to products already in the marketplace as of Feb. 15, 2007. The bulk of e-cigs and vaporizers debuted after that date.
The FDA defines substantially equivalent as “being the same in terms of ingredients, design, composition, heating source and other characteristics to an existing, single predicate product or have different characteristics, but not raise different questions of public health.”
Products introduced into the marketplace after that date would retroactively go through stiffer regulatory requirements to prove they don’t cause public harm. That includes providing more detail on liquid nicotine ingredients and manufacturing details.
Some industry observers say they believe the existing predicate date would drastically curtail product innovations, particularly by companies that don’t have the research and development budgets of Reynolds American Inc., Philip Morris USA and their affiliates.
The coalition said the regulations are a “direct challenge to Congress’ wishes” with the federal Tobacco Control Act. If allowed to go into effect, the coalition claimed “the vast majority of such products will be forced to exit the market over the next two years.”
“Plaintiffs are fully committed to the safety of electronic nicotine delivery systems, from manufacturing through distribution, and recognize the need for reasonable regulation at the federal level,” the coalition said in its lawsuit.
Analysts have said it could cost millions of dollars for each product to go through the heightened regulatory requirements. The FDA estimates it would cost about $500,000.
“FDA substantially overestimates the benefits of the deeming rule and underestimates its costs,” according to the complaint.
The FDA said manufacturers will be able to continue selling their products for up to two years while they submit a new tobacco product application. They would get an additional year during the review process.
House Republicans were successful in introducing an amendment to the fiscal 2016-17 federal agriculture budget that would allow the grandfathering of most current e-cigs and vaporizers if the FDA wants the funding needed to implement the new regulations.
Coalition members also object to their products being regulated as traditional cigarettes, which they described as a “one-size-fits-all” strategy, when there are an increasing number of studies that have shown a distinct harm-reduction role for e-cigs and vaporizers.
For example, the Royal College of Physicians issued a high-profile report in April that found e-cigs and vaporizers were 95 percent less harmful than traditional cigarettes.
Other tobacco products subject to potentially tighter regulations are cigars, pipe tobacco, nicotine gels, water-pipe or hookah tobacco and dissolvable products.
Nicopure Labs LLC of Tampa, Fla., was the first vaping company to sue the FDA over the regulations.
At least two cigar manufacturers have filed lawsuits. A subsidiary of Altria Group Inc., John Middleton Co. LLC, wants to stop the FDA from banning its “Black & Mild” brand name for cigars and pipe tobacco because mild is in the name.
Global Premium Cigars LLC of Miami wants to prevent the FDA from requiring labels that could comprise up to 30 percent of its cigar box. The group objects to how the FDA rules affect trademarked and copyrighted artwork.

The Lost Vape Therion DNA75 TC Box Mod



The Lost Vape Therion DNA75 TC Box Mod is the first dual 18650 platform to be utilized in a Evolv's DNA75 integrated system, combining an ergonomic portable form factor with beautiful genuine leather wrapped battery cover and stunning wood panels for a beautifully machined chassis. The Therion DNA75 features a dual 18650 battery driven design that allows the most popular battery size to be used with Evolv's newest DNA75 intelligent chipset, allowing unprecedented convenience when using a DNA internal board. The stylish genuine battery door adds a distinct look as well as a comfortable feel during use, working in tandem with the Therion's stunning design (similar to the Lost Vape Triade). The premium wood inlay further pushes the edge of craftsmanship and uniqueness, presenting beautiful yet subtle panels on each side of the device for a truly spectacular showcase piece. Built with usability and performance in mind, the Therion DNA75 integrates the revolutionary Evolv's DNA75 chipset, able to be drive up to 75W with an incredible 85% efficiency ratings and sophisticated customization ranging from full temperature regulation to personalized screen options. From the storied tradition of Lost Vape to create the most beautiful and functional DNA devices, the Lost Vape Therion DNA75 Box Mod is an excellent performance device with near unmatched portability in it's class.





Lost Vape Therion DNA75 TC Box Mod Features:

Dual 18650 High-Amp Battery - Sold Separately
Wattage Output Range: 1~75W
Voltage Output Range: 0.6~6V
Min Kanthal Resistance: 0.25ohm
Min Temperature Resistance: 0.15ohm
Temperature Range: 200-600F
Supports Ni200 Nickel, Titanium, and Stainless Steel 
Intuitive OLED Display
Die Cast Zinc Alloy Chassis Construction
Genuine Leather Battery Door
Stunning Wood Panels Inserts
Three-Button Operation
Patented Evolv DNA75 Chipset
Upgradeable Escribe Software
85% Output Efficiency
Cell-by-Cell Monitoring
Cell Balancer
Atomizer Protection
Low Resistance Protection
Short Circuit Protection
Overheat Protection
Low Voltage Step Down Protection
MicroUSB Port - Firmware Upgrades
Stainless Steel 510 Thread Point
Spring-Loaded Nickel Plated Brass 510 Connection


VISION Vapros Wave Mod(Limited Version). Synthetic camel bone and TPC hand made mod. DIY output wattage


VISION Vapros wave mod is a limited version with special cover. Wave is a really strict precision 

temperature control mod. You may DIY output wattage.






Feature


• Limited version. Main material: Synthetic camel bone and TPC.
• Wave is a really strict precision temperature control mod.
• The Coil will not turn red in temperature control mode.
• DIY output wattage.
• Automatically compatible with all the kinds of temperature control coil.
• Different mode supports 0.03ohm ~ 3ohm taste type atomizers.
• Output power: 5W-80W, 200-600℉(100-315℃)
• Size: 92.5mm(L) x 43mm(W) x 27mm(H)
• Net weight: 110g
• 1*18650 2000mAh rechargeable battery
• Color: PiYao-Rich, Ghost





Package

1 set / cloth box
Box size: 113mm(L) x 86mm(W) x 45mm(H)
Weight with box: 234g

Each set contains:
1 pc Wave Mod
1 pc Micro-USB charger cable
1 pc User Manual


2016年6月6日星期一

VISION Vapros DIY 80 Precision Temperature Control Mod Vision DIY80 BOX MOD



Vapros DIY 80 is a really strict precision temperature control mod. The Coil will not turn red in temperature control mode. It supports DIY output wattage and automatically compatible with all the kinds of temperature control coil.



Feature

1. DIY 80 is a really strict precision temperature control mod.
2. The Coil will not turn red in temperature control mode.
3. DIY output wattage
4. Automatically compatible with all the kinds of temperature control coil.
5. Different mode supports 0.03ohm ~ 3ohm taste type atomizers.
6. Output power: 5W-80W, 200-600℉(100-315℃)
7. Size: 85mm(L) x 22mm(W) x 40mm(H)
8. Net weight: 146g
9. 1*18650 2000mAh rechargeable battery
10. Color: Black, White, Stainless






Package

1 set / paper box
Box size: 100mm(L) x 98mm(W) x 47mm(H)
Weight with box: 245g


Each set contains:


1 pc DIY 80
1 pc Micro-USB charger cable
1 pc User Manual


http://skynowecig.en.alibaba.com/
kris@skynowecig.com
https://www.facebook.com/kris.skynowecig
https://twitter.com/KrisSkynowecig

Lost Vape Triade DNA200



Powered by Evolv DNA200 temperature protection board  
With Evolv's Escribe software, dial in your perfect vape with over 93 options 
Firmware upgradeable 
Magnetic battery cover
Triple cell setup for long-lasting power
Temperature Limit: 200°F - 600°F
Output power: 1Watt - 200Watts 
Body material: Die Cast Zinc Alloy  
Stainless steel 510 atomizer connector 
Spring loaded nickel plated brass center pin
Integrated 1Amp micro-USB on-board balanced charger (cord included)
Cell-by-cell monitoring 
Pass-thru charging functionality
Dimensions: 85mm*50mm*40mm
Standard Cover material: Genuine Leather










http://skynowecig.en.alibaba.com/
kris@skynowecig.com
https://www.facebook.com/kris.skynowecig
https://twitter.com/KrisSkynowecig

LostVape Halcyon Squonker DNA200 Mod

LostVape Halcyon Squonker DNA200 Mod


Powered by Evolv DNA200 temperature protection board  
With Evolv's Escribe software, dial in your perfect vape with over 93 options
900mAh 10 watt hour 11.1V 30C 3 cell FullyMax lithium polymer battery 
Utilizing an XT30 connector for user serviceability 
Firmware upgradeable 
Temperature Limit: 200°F - 600°F
Output Power: 1Watt - 200Watts
Precision CNC machined of 6063-T6 aluminum body
Custom made built-in 8.0 ML squonk ejuice bottle
Stainless steel ball bearing sliding lock back panel 
Polished and bright dip anodized glossy finish 
22mm stainless steel 510 atomizer connector 
Compatible with all regular atomizers
Spring loaded stainless steel positive pin 
Ultra responsive custom milled stainless steel buttons
Requires a bottom feed atomizer to work properly (not included)
Integrated 1Amp micro-USB on-board balanced charger (cord included)
Cell-by-cell monitoring 
Pass-thru charging functionality
Dimensions: 85mm*60mm*25mm 
Standard cover material: Carbon Fiber









http://skynowecig.en.alibaba.com/
kris@skynowecig.com
https://www.facebook.com/kris.skynowecig
https://twitter.com/KrisSkynowecig

Evolv DAN200 Temperature Control Box MOD Lost Vape Efusion Duo 200/133 watt

Evolv DAN200 Temperature Control Box MOD Lost Vape Efusion Duo 200/133 watt

Features the latest DNA board from Evolv

First Device to take advantage of the dual 200/133 watt feature of the DNA200 board

Dual 18650 battery mode(standard) 133W

3S lipo battery mode(optional)200W

510 connection with solid spring,

Full SS housing,and brass centre pin

91mm*56mm*26mm

Replaceable panel

Finishes: black, silver, sapphire blue, red

Standard Cover material: Carbon Fiber, Natural Wood Veneer 

Limited Edition Covers: New Zealand Abalone, Genuine Leather etc. 

6 months manufacturer warranty









http://skynowecig.en.alibaba.com/
kris@skynowecig.com
https://www.facebook.com/kris.skynowecig
https://twitter.com/KrisSkynowecig


2016年4月26日星期二

NEW Generation VISION Spinner Plus Battery

NEW Generation VISION Spinner Plus Battery



Spinner Plus is a low resistance battery with the conversion between full-power mode and constant voltage mode(Bottom Various Voltage). The battery in hand, comfortable feeling and conform to Ergonomics. Built-in 1500mah, 20A perfect combination of high-rate lithium battery. Micro USB port makes charging easily



Parameters

Capacity: 1500mAh
Voltage: 3.3-5.0V
Weight: 86g
Size: 107.5(L)*20(D)mm
Color: Black, Stainless

Features

1. Spinner Plus is a low resistance battery with the conversion betweenfull-power mode and constant voltage mode(Bottom Various Voltage).
2. The battery in hand, comfortable feeling and conform to Ergonomics.
3. Built-in 1500mah, 20A perfect combination of high-rate lithium battery.Micro USB port makes charging easily.
4. Full-power mode supports 0.2ohm ~ 0.9ohm sub-ohm atomizers.
5. Constant voltage mode supports 1.0ohm ~ 3.2ohm taste type atomizers.

Package
1 set / paper box
Box size: 142mm(L) x 66mm(W) x 45mm(H)
Weight with box: 180g

Each set contains:
1 pc Spinner Plus Battery
1 pc Connecting Cone
1 pc Micro-USB Charger
1 pc User Manual